• DIRECT, MULTIPLEX, CONNECTED DIAPHRAGM CONDUCTIVE AND NORMLLLY OPEN SOLENOID VALVE (UG-NO Series)

UG-NO

FORGE BRASS SOLENOID VAVLE
NORMALLY OPENED. SCREWED END
BSPT, NPT, BSP. AC110V/220V, DC24V.
FOR GAS,VACUUM USE.
3/8”~1” (FORGED BRASS)
1-1/4”~2” (BRONZE)
PRESS: 0-7 KGF/CM2 TEMP: -5~80℃.
(UG-NO Series) DIRECT, MULTIPLEX, CONNECTED DIAPHRAGM CONDUCTIVE AND NORMLLLY OPEN SOLENOID VALVE

  1. UG-NO SERIES IS PILOT DIAPHGRAM DRIVE, NORMAL OPEN.
  2. VALVE BODY MADE OF 3/8”~1” FORGED BRASS OR 1.1/4”~2” CAST BRONZE.
  3. UG-NO CAN BE OPERATED DIRECTLY WITHOUT PRESSURE.
  4. STANDARD VOLTAGE: 110VAC / 220VAC / 24VDC. (50/60HZ)
  5. SPECIAL VOLTAGE AC/DC FOR CUSTOMER MADE.
  6. SCREWED END: BSPT, NPT, BSP.
  7. NORMAL WORKING TEMPERATURE: 80℃ (NBR).
  8. AC VOLTAGE TOLERANCE: +/- 10%
    DC VOLTAGE TOLERANCE: +/- 1%
  9. NOT APPLY FOR FLUID OF
    LIQUID STATUS WHEN HEAT, SOLID STATUS WHEN COOL.
    VISCOSITY OVER 20 CST.
    CORROSIVE FLUID.

(UG-NO Serie) SOLENOID VALVE
MODEL: UG-NO 

  1. UG-NO SERIES IS PILOT DIAPHGRAM DRIVE, NORMAL OPEN.
  2. VALVE BODY MADE OF 3/8”~1” FORGED BRASS OR 1.1/4”~2” CAST BRONZE.
  3. UG-NO CAN BE OPERATED DIRECTLY WITHOUT PRESSURE.
  4. STANDARD VOLTAGE: 110VAC / 220VAC / 24VDC. (50/60HZ)
  5. SPECIAL VOLTAGE AC/DC FOR CUSTOMER MADE.
  6. SCREWED END: BSPT, NPT, BSP.
  7. NORMAL WORKING TEMPERATURE: 80℃ (NBR).
  8. AC VOLTAGE TOLERANCE: +/- 10%
    DC VOLTAGE TOLERANCE: +/- 1%
  9. NOT APPLY FOR FLUID OF
    LIQUID STATUS WHEN HEAT, SOLID STATUS WHEN COOL.
    VISCOSITY OVER 20 CST.
    CORROSIVE FLUID.


ug-no-3.png