SS316-S67
ST.ST.316 SAFETY RELIEF VALVE
SCREWED END TO BS21, ANSI B2.1
BODY/DISC/SEAT: SUS316. (1*1)
SET P.: 3.5, 7, 10 KGS/CM2.
SIZE: 1/2”~2” (WITHOUT LEVER)
INLET: MALE / OUTLET: FEMALE
SCREWED END TO BS21, ANSI B2.1
BODY/DISC/SEAT: SUS316. (1*1)
SET P.: 3.5, 7, 10 KGS/CM2.
SIZE: 1/2”~2” (WITHOUT LEVER)
INLET: MALE / OUTLET: FEMALE
(SS316-S67) NIEDERHUB MF ST.ST.316 SICHERHEITSVENTIL
" 317 " BRAND ST.ST.316 SAFETY RELIEF VALVE (M/F) BODY/SEAT/DISC: SUS316. SPRING: SUS304. SCREWED END TO BSPT, NPT. WITHOUT LEVER. SET: 10 KGS. 317 SEAL OF SAFETY RELIEF VALVE (LOW LIFT & FULL BORE) OF T-ONE-S TRADING INC. TAIWAN MANUFACTURER
(SS316-S67) ST.ST.316 SAFETY RELIEF VALVE
(WITHOUT LEVER)
Please specify the required Working Pressure and Set Pressure when ordering.
This type of safety valve is characterized by regulating of pressure in valve rising and blowing-out when actuated and is the smallest and lightest valve, and also can be used in non-corrosive gases (air, oxygen, nitrogen, etc.) steam and liquids, such as water and oil. The dimensions shown in the chart are subject to change without notice.
(SS316-S67) ST.ST.316 SAFETY RELIEF VALVE
(WITHOUT LEVER)
Please specify the required Working Pressure and Set Pressure when ordering.
This type of safety valve is characterized by regulating of pressure in valve rising and blowing-out when actuated and is the smallest and lightest valve, and also can be used in non-corrosive gases (air, oxygen, nitrogen, etc.) steam and liquids, such as water and oil. The dimensions shown in the chart are subject to change without notice.
